Key Takeaways
- Screen size and count drive most of a cabinet's draw — dual-screen uprights use roughly double a deli unit.
- Hours-operated matters as much as wattage; a 14-hour day dominates the monthly bill.
- Use the estimate to size circuits and confirm venue power capacity before install.
Illustrative estimates based on operator-provided inputs. Actual results depend on market conditions, player behavior, and regulatory requirements. Licensing and compliance in your market are your responsibility — confirm your local rules.
How This Calculator Works
Power budgeting is a load business: cabinets × watts × hours × tariff. This tool lets a licensed operator estimate daily and monthly electricity cost for a bank of machines from four inputs — cabinet count, watts per cabinet, hours operated per day, and your electricity tariff.
Everything runs in your browser. No inputs are transmitted or stored.
The Model
daily_kwh = cabinets × watts / 1000 × hours
daily_cost = daily_kwh × tariff
monthly_cost = daily_cost × 30
The split by cabinet type matters: a floor of dual-screen uprights and a floor of deli units at the same count draw very differently, which changes both the bill and the circuit sizing.
A Worked Example
20 dual-screen uprights at 380 W, 14 hours/day, $0.14/kWh:
- Daily kWh = 20 × 380 / 1000 × 14 = 106.4 kWh
- Daily cost = 106.4 × $0.14 ≈ $14.90
- Monthly cost ≈ $447
Swap to 20 deli units at 150 W and the monthly bill drops to ~$176 — a real floor-planning lever.
Size the Circuit, Not Just the Bill
A 106 kWh/day load at 230 V is ~21 A continuous — within a 32 A circuit, but stacking other loads needs care. Use the estimate to confirm your venue power capacity before install, and check local electrical code with your licensed contractor.
Related Products
- Gaming cabinet selector — match form factor to foot traffic
- Slot machines — upright, slant and deli cabinets, 27"–55" LCD
- Custom slot machine development — OEM/ODM builds
- OEM spec builder — draft a structured build spec
Explore the full set of operator tools on the Interactive Tools hub.
Entity context
- Tool: Gaming Machine Power Consumption Calculator | GOLDPRIME — a business application by GOLDPRIME GAME, a licensed-market gaming machine manufacturer.
- Part of GOLDPRIME's gaming operations toolkit; pairs with the Cabinet Selector and the compliance hub for regulated-market deployment.
- Industry standard: GLI / BMM certification for gaming machine math and RNG (per market, per order).
- Related: Gaming Cabinet Selector
- Related: Compliance
- Related: Instant Quote
References & standards
Frequently Asked Questions
What wattage should I assume per cabinet?
Figures vary by screen package. A single 27" deli unit often draws 120–180 W; a dual 32" upright with topper can draw 300–450 W. The calculator uses operator-entered wattage so you can match the real spec sheet of the cabinet you deploy.
Does this include bill validators, lighting and HVAC?
No — this models the machines only. Floor lighting, HVAC and peripheral devices are separate loads. Add them on top when sizing your venue's total service capacity.
Why does hours-operated dominate the bill?
Because energy cost = watts × hours. A 400 W cabinet at 14 hours/day costs far more than a 200 W unit at 8 hours, even though the per-unit wattage looks similar. The monthly figure scales linearly with operating hours.
Do your cabinets publish wattage?
Yes — every GOLDPRIME GAME cabinet ships with a stated draw in its spec sheet, scoped per market and per order, and we can provide the figure for your quote.